Saltar al contenido principal
Elsevier

Libros en Energía y Potencia

  • Modern Batteries

    • 2 Edición
    • C. Vincent + 1 más
    • Inglés
    Based on the successful first edition, this book gives a general theoretical introduction to electrochemical power cells (excluding fuel cells) followed by a comprehensive treatment of the principle battery types - covering chemistry, fabrication characteristics and applications. There have been many changes in the field over the last decade and many new systems have been commercialised. Since the recent advent of battery powered consumer products (mobile phones, camcorders, lap-tops etc.) advanced power sources have become far more important. This text provides an up-to-date account of batteries which is accessible to anyone with a basic knowledge of chemistry and physics.

  • Simplified Design of Voltage/Frequency Converters

    • 1 Edición
    • John Lenk
    • Inglés
    Simplified Design of V/F Converters shows how to design and experiment with V/F converters, both voltage-to-frequency and frequency-to-voltage... The design approach here is the same one used in all of John Lenk's best-selling books on simplified and practical design. Throughout the book, design problems start with guidelines for selecting all components on a trial-value basis, assuming a specific design goal and set of conditions. Then, using the guideline values in experimental circuits, the desired results are produced by varying the experimental component values, if needed. If you are a working engineer responsible for designing VFCs, or selecting IC converters, the variety of circuit configurations described here should simplify your task. Not only does the book describe converter-circuit designs, but it also covers the most popular forms of VFC ICs available. Throughout the book, you will find a wealth of information on VFC ICs and related components, including how to test and troubleshoot completed circuits.

  • European Electricity Systems in Transition

    A comparative analysis of policy and regulation in Western Europe
    • 1 Edición
    • A. Midttun
    • Inglés
    The electricity generation and supply industry is undergoing rapid changes in the 1990s. As demands for economic power continue to increase, governments throughout Europe are contemplating a reformation of electricity policy for the 21st century. This book discusses the current state of the European electricity generation and supply industry and the options for improvement in the future.Written by renowned experts in the field of energy policy and economics, the book includes detailed case studies of national electricity regulation from around Europe, and a timely overview of European Union electricity policy on liberalisation and deregulation.Given that the changes to the European electricity industries will provide valuable pointers to change in other areas, this book is essential reading for industry analysts, policy makers, utility companies and others with an interest in the future of energy generation and transmission worldwide.

  • Handbook of Fire & Explosion Protection Engineering Principles for Oil, Gas, Chemical, & Related Facilities

    • 1 Edición
    • Dennis P. Nolan
    • Inglés
    The security and economic stability of many nations and multinational oil companies are highly dependent on the safe and uninterrupted operation of their oil, gas and chemical facilities. One of the most critical impacts that can occur to these operations are fires and explosions from accidental or political incidents. This publication is intended as a general engineering handbook and reference guideline for those personnel involved with fire and explosion protection aspects of critical hydrocarbon facilities. Design guidelines and specifications of major, small and independent oil companies as well as information from engineering firms and published industry references have been reviewed to assist in its preparation. Some of the latest published practices and research into fire and explosions have also been mentioned.

  • Protection of Industrial Power Systems

    • 2 Edición
    • T. DAVIES
    • Inglés
    The protection which is installed on an industrial power system is likely to be subjected to more difficult conditions than the protection on any other kind of power system. Starting with the many simple devices which are employed and covering the whole area of industrial power system protection, this book aims to help achieve a thorough understanding of the protection necessary.Vital aspects such as the modern cartridge fuse, types of relays, and the role of the current transformer are covered and the widely used inverse definite-minimum time overcurrent relay, the theory of the Merz-Price protection system and the development of the high-impedance relay system are critically examined. This new edition has come about in response to the dramatic change from the use of electro-magnetic relays to electronic and micro-processor relays which figure in practically all new installations. Therefore, although the theory and usage are the same, the application can be much improved owing to the increased range and accuracy and the added facilities provided with the modern relays. This book reflects the change and explains the technical advantages.

  • Standard Handbook of Petroleum and Natural Gas Engineering: Volume 1

    • 1 Edición
    • William C. Lyons
    • Inglés
    Petroleum engineering now has its own true classic handbook that reflects the profession's status as a mature major engineering discipline.Formerly titled the Practical Petroleum Engineer's Handbook, by Joseph Zaba and W.T. Doherty (editors), this new, completely updated two-volume set is expanded and revised to give petroleum engineers a comprehensive source of industry standards and engineering practices. It is packed with the key, practical information and data that petroleum engineers rely upon daily.The result of a fifteen-year effort, this handbook covers the gamut of oil and gas engineering topics to provide a reliable source of engineering and reference information for analyzing and solving problems. It also reflects the growing role of natural gas in industrial development by integrating natural gas topics throughout both volumes.More than a dozen leading industry experts-academia and industry-contributed to this two-volume set to provide the best , most comprehensive source of petroleum engineering information available.

  • Science and Technology of Ceramic Fuel Cells

    • 1 Edición
    • N.Q. Minh + 1 más
    • Inglés
    Ceramic fuel cells, commonly known as solid oxide fuel cells (SOFCs), have been under development for a broad range of electric power generation applications. The most attractive feature of the SOFC is its clean and efficient production of electricity from a variety of fuels. The SOFC has the potential to be manufactured and operated cost-effectively. The widening interest in this technology, thus, arises from the continuing need to develop cleaner and more efficient means of converting energy sources into useful forms.This topical book provides a comprehensive treatise on solid oxide fuel cells and succeeds successfully in filling the gap in the market for a reference book in this field. Directed towards scientists, engineers, and technical managers working with SOFCs as well as ceramic devices based on conducting materials, and in related fields, the book will also be invaluable as a textbook for science and engineering courses.

  • Underground Gas Storage Facilities

    Design and Implementation
    • 1 Edición
    • Orin Flanigan
    • Inglés
    You get information needed to evaluate a reservoir, determine the particular requirements of the job, and design a storage facility that will operate at its full potential. Underground Gas Storage Facilities combines background information with a systematic approach for examining a specific reservoir to determine the most appropriate day-to-day method of operation. It presents a thorough discussion of topics such as estimating customer requirements, types of storage, sizing of surface facilities, and estimating deliverability. Of particular interest is the section on the economics of storage design, which examines the specific cost factors involved and presents examples to determine an economically optimum design.

  • Handbook of Inorganic Electrochromic Materials

    • 1 Edición
    • C.G. Granqvist
    • Inglés
    Electrochromic materials are able to change their optical properties in a persistent and reversible way under the action of a voltage pulse. This book explores electrochromism among the metal oxides, with detailed discussions of materials preparation (primarily by thin film technology), materials characterization by (electro)chemical and physical techniques, optical properties, electrochromic device design, and device performance. The vast quantity of information presented is structured in a systematic manner and the optical data is interpreted within a novel conceptual framework.The publication will serve as a comprehensive foundation and reference work for future studies within the rapidly expanding field of electrochromic materials and devices. These devices are of particular interest for information displays, variable-transmittan... (smart) windows, variable-reflectance mirrors and variable-emittance surfaces.

  • Solar Energy Conversion

    The Solar Cell
    • 2 Edición
    • R.C. Neville
    • Inglés
    A large number of solar cell and solar cell systems are described in this volume. The theory of their operation, their design and the levels of their performance is discussed. Originally the book appeared in 1978 but extensive change over the intervening years in the fields of energy generation and consumption, solar energy and solar cells, has necessitated the publication of an updated version.The text initially surveys the requirements of humanity, the subsequent need for solar cells, the nature of sunlight and the properties of semiconductors. Concrete examples, extensive references and theoretical arguments are then used to present a comparison of options available in the design and operation of solar cells and solar cell systems. The cells - constructed from single, crystal, polycrystalline and amorphous semiconductors - and the systems - have varying designs and differing levels of solar energy for input and produce electricity or electrical and thermal energies. Solar cell production, economics and environmental effects are considered throughout the publication.

Temas relacionados